1. Efficiency – If you describe the brazed plate heat exchangers in one word, it will be this. Their entire design is aimed at achieving the most productive area with minimal financial costs. This is due to very strong turbulence of flows due to the geometry of plates and low corrugations. At the same time, relevance to cases with small temperature differences is not lost.
2. Fields of application. The absence of rubber gaskets in the presence of welds allows using a brazed plate heat exchanger for tasks with corrosive or hazardous fluids. Indeed, in this case, it is necessary to avoid possible leakage of substances, which is impossible in the devices without welds.
3. Operating parameters. The brazed heat exchanger may be used at positions where the pressure may reach 45 bar. The maximum operating temperature is 250 °C.
4. Compactness. A brazed heat exchanger takes up much less space when compared with other types of equipment. This is primarily ensured by high efficiency. If we compare the same positions, it can be hugely smaller than the shell-and-tube one, and several times smaller than gasketed one.
5. Self-cleaning effect. Due to the low height of corrugations, removal of contaminants from the plate surface should be carried out directly during operation. This is due to the high degree of turbulization of flows. Because of this, deposits are washed off by the working fluid itself.
6. Reliability. Brazed plate heat exchanger has a very long service life – more than 5 years. Under the right conditions of use, it can be about 10-15 years. In addition, the design excludes possibility of leaks and overflows.
7. Delivery period. Low material consumption makes it possible to manufacture the brazed heat exchangers within a very short period. And the geographical location of our company will greatly simplify delivery.
8. A large range of products. A variety of plates and designs makes it possible to choose the most optimal equipment. All customer requirements are also taken into account. There is the possibility of manufacturing from various materials and alloys.
